Cinderella High tide update #2 – walkthrough of the boat with all the hatches o…
Cinderella High tide update #2 – walkthrough of the boat with all the hatches open and water depth measurements at high tide #nauticinderella #cinderellaupdat
https://www.facebook.com/70684391248/posts/10153800548511249
Any idea on repairs? I hope insurance is going to cover it.
Things are finally starting to look good. Pulling for you !!!
Looks to me like she should pull out of there at high tide..if you had a place to take her out of the water
I wish you luck with all of this Cindy, I hope you can get the old girl out of there and repaired soon.
Good luck!
As I said in another posting , the limber holes will not pass enough water to get a boat full of water dewatered. You need multiple pumps in different locations to pump it out evenly so you get it level and get the maximum amount of water out. I always put “run dry” pumps in the bow and stern and keep the boat balanced as I pump.
You also need to lift it slowly and carefully with the lift to let the water run out and empty so you do not blow boards off the bottom with the weight of the water when you pick it up full of water. and again, keep it level when you lift it so you do not trap a lot of water in the bow or stern that will break the boat.