What’s something creative I can do to cover these holes since there’s no televis…

/21 Comments/in ,

What’s something creative I can do to cover these holes since there’s no television here anymore??? I was hoping it was just one neat hole that I could put a bung in I’d like to not have the cable or anything sticking up anymore.



https://www.facebook.com/groups/70684391248/permalink/10156497665966249

Source
Posted by: Cindy Chebultz

URL:

https://www.facebook.com/70684391248/posts/10156497665966249

21 replies - (see the "source" link above to see all the comments)
  7. Justin Smith
    Justin Smith says:

    If you can easily get to back side put a temp peace there to keep wood putty from coming out the bottom side. You can do it with out that step it just may amen a few more layers

  8. Jerry Staczek
    Jerry Staczek says:

    I’d have to agree with Justin Smith. With a boat, as in life, pick your battles. However, if it’s just going to continue to bug you, then (hate to say it but)..remove and replace. It’s not that large an area.

  16. Kent Volmerding
    Kent Volmerding says:

    I would tape on underside. Then tape over holes on top side. Then use xacto knife to cut out hole in tape. Then I mix WEST EPOXY and 405 filler(wood color) then add mahogany dust to tint to match as close as possible. When about dry, pull tape and when dry retape and sand with 320 grit. I would them revarnish table top. Between coats of varnish you can pencil in a little wood grain and you will barely see repair.

  19. Mark Miller
    Mark Miller says:

    Cindy you could easily skin over it w/ Mahogany veneer and change / mill new molding to accommodate the extra veneer thickness. Stain/Finish to match. Or even use a different material skin completely for a more utilitarian use.

Comments are closed.