Someone had previously tried to break in and broke this glass on the port side, …

Someone had previously tried to break in and broke this glass on the port side, starboard side is good. The glass shop asked if I could bring it to them to cut … so what's the easiest way to get this out??? Preferably without removing any of the interior woodwork, it still has the original finish. :: UPDATE:: when I took the blinds down the top and side panel had exposed screws so when I took those wooden panels off and took all of the screws out of the upper channels that were holding the glass, both pieces of glass slid inward. I've got all the broken pieces of glass taped together and wrapped in cardboard and ready to go to the glass shop.





Someone had previously tried to break in and broke this glass on the port side, starboard side is good. The glass shop…

Posted by Cindy Chebultz on Thursday, April 11, 2019

Source
Posted by: Cindy Chebultz

UPS just delivered this and I had to open up a box to see how it matched. It a…

UPS just delivered this and I had to open up a box to see how it matched. It actually matches a lot better in person than it does in pictures. And it goes a lot better than all the other samples that we picked up. At Amazon and less than $1 a sq ft.





UPS just delivered this and I had to open up a box to see how it matched. It actually matches a lot better in person…

Posted by Cindy Chebultz on Thursday, April 11, 2019

Source
Posted by: Cindy Chebultz

On the move again. She is liking being in the sun again.

On the move again. She is liking being in the sun again.🌞


On the move again. She is liking being in the sun again.🌞

Posted by Albert Bartkus on Wednesday, April 17, 2019

Source
Posted by: Albert Bartkus

So I think I’ve found photos of what my canvas deck skirting should look like ….

So I think I’ve found photos of what my canvas deck skirting should look like … But how do you keep the lower corners shaped / sticking out following the corner?? (Last pic is what I’ve got currently)




So I think I've found photos of what my canvas deck skirting should look like … But how do you keep the lower corners shaped / sticking out following the corner?? (Last pic is what I've got currently)

Posted by Cindy Chebultz on Tuesday, May 7, 2019

Source
Posted by: Cindy Chebultz

Got the Beugler pin striper today. Ill be striping anything that gets in my way …

Got the Beugler pin striper today. Ill be striping anything that gets in my way soon. But first a few counter tops.


Got the Beugler pin striper today. Ill be striping anything that gets in my way soon. But first a few counter tops.

Posted by Albert Bartkus on Tuesday, May 7, 2019

Source
Posted by: Albert Bartkus

He can even create a table saw out of the salon top #boatwithnoname

He can even create a table saw out of the salon top #boatwithnoname



He can even create a table saw out of the salon top #boatwithnoname

Posted by Cindy Chebultz on Sunday, April 7, 2019

Source
Posted by: Cindy Chebultz

A few last finishing touches before he leaves #boatwithnoname

A few last finishing touches before he leaves #boatwithnoname


A few last finishing touches before he leaves #boatwithnoname

Posted by Cindy Chebultz on Saturday, April 6, 2019

Source
Posted by: Cindy Chebultz

The big splash and crossing the lake #boatwithnoname

The big splash and crossing the lake #boatwithnoname

The big splash and crossing the lake #boatwithnoname

Posted by Cindy Chebultz on Friday, April 5, 2019

Source
Posted by: Cindy Chebultz

Now it’s officiall. This is the burgee I gave her when I meet Cindy at Cinderell…

Now it’s officiall. This is the burgee I gave her when I meet Cindy at Cinderella in Jacksonville several years ago. New beginnings. And all the associated aches and pains 😃.

Now it's officiall. This is the burgee I gave her when I meet Cindy at Cinderella in Jacksonville several years ago. New beginnings. And all the associated aches and pains 😃.

Posted by Albert Bartkus on Friday, April 5, 2019

Source
Posted by: Albert Bartkus

Our freind Justin offered to don my dive gear and remove something out of my por…

Our freind Justin offered to don my dive gear and remove something out of my port wheel. It was a coat of all things. 30 min dive. Water is still sitting at 48 degrees in the river. I do have a dry suit which fit him well. 👍




Our freind Justin offered to don my dive gear and remove something out of my port wheel. It was a coat of all things. 30…

Posted by Albert Bartkus on Saturday, May 4, 2019

Source
Posted by: Albert Bartkus