Posts

Last #rocket update for tonight … He’s a very happy boy!! :-) Brody Campbell

Last #rocket update for tonight … He’s a very happy boy!! Brody Campbell

Last #rocket update for tonight … He's a very happy boy!! 🙂 Brody Campbell

Posted by Cindy Chebultz on Monday, January 7, 2019

Source

#Rocket update! He told me to hold this lever and didn't tell me to let go…

#Rocket update! He told me to hold this lever and didn’t tell me to let go once it started. We might try it again once we repair the hole in our trash can lol!! And take the prop off!! I’ve been out in this garage with him for 10 days now with aircraft paint stripper, oven cleaner, alumabrite, polish, etc. Thank goodness he goes back to school tomorrow! Brody Campbell

#Rocket update! He told me to hold this lever and didn't tell me to let go once it started. We might try it again once…

Posted by Cindy Chebultz on Monday, January 7, 2019

Source

Mercury Monday … Now what do we try. Choke was on until it fired, bubble is p…

Mercury Monday … Now what do we try. Choke was on until it fired, bubble is pumped. he cleaned the magneto and tested it for spark and compression. #rocket

https://www.facebook.com/2381700208/posts/10157095265555209

Source

Okay round three of testing and I think I have figured out our goal for the top …

Okay round three of testing and I think I have figured out our goal for the top until next winter … Sand with 800 grit, smear a tad bit of G6 on all over a pad and hand polish, then put a piece of steel wool on the buffer and buff until even. You can still see some of the swirls from the previous owners sanding if you look close in bright light, but it's 1000% better. Might try to figure out a way to knock off just a bit of the shine on the raised part so the swirls are not as noticeable, but without removing the polish in the recessed parts, I like the bit of contrast the polish adds . #rocket Brody Campbell




Okay round three of testing and I think I have figured out our goal for the top until next winter … Sand with 800…

Posted by Cindy Chebultz on Sunday, January 6, 2019

Source

Here are some better pictures of what I'm talking about on the swirls on th…

Here are some better pictures of what I'm talking about on the swirls on the top. These are where the previous owner sanded, primed and painted the boat. I've sanded it with 1500 grit sandpaper and polished it with G6 a few times already. It's already lots better and you don't see the swirls much from a foot or two away. #rocket Brody Campbell




Here are some better pictures of what I'm talking about on the swirls on the top. These are where the previous owner…

Posted by Cindy Chebultz on Sunday, January 6, 2019

Source

What's the best solution for our textured top?? It has swirls from previous…

What's the best solution for our textured top?? It has swirls from previous owners sanding. I've sanded a little with 3000 grit… I've tried polish? This entire boat was painted for many years. We've almost gotten all the primer off of the textured top. There are however some swirls from when someone prior sanded it. This first pic is just alumabrite cleaner. The second pic is where I tried to polish (turns out uneven). The other pics are before. Brody Campbell #rocket




What's the best solution for our textured top?? It has swirls from previous owners sanding. I've sanded a little with…

Posted by Cindy Chebultz on Sunday, January 6, 2019

Source

Started at 80 grit and oven cleaner getting the anodized coat off… Getting clo…

Started at 80 grit and oven cleaner getting the anodized coat off… Getting close!!! #rocket Brody Campbell


Started at 80 grit and oven cleaner getting the anodized coat off… Getting close!!! #rocket Brody Campbell

Posted by Cindy Chebultz on Saturday, January 5, 2019

Source

The magneto has a new gasket and passed ohms test … Motor has compression and …

The magneto has a new gasket and passed ohms test … Motor has compression and spark thanks to my kiddo Brody Campbell… just waiting on the epifanes varnish for the transom so we can put it back on #rocket

https://www.facebook.com/2381700208/posts/10157091103410209

Source

Holy crap that thing is heavier than I thought. He’s going to check the points….

Holy crap that thing is heavier than I thought. He’s going to check the points… But what else should he do while we have it apart? #rocket




https://www.facebook.com/2381700208/posts/10157075956005209

Source

So we don’t have enough clearance to get the magneto out … there’s a throttle …

So we don’t have enough clearance to get the magneto out … there’s a throttle linkage that seems to be in the way??? #rocket


https://www.facebook.com/2381700208/posts/10157074304660209

Source